Powered by GitBook

1 of 1

Loading...

Preparing the configure

Procedure

1

Step 1: Please fill in the formation in yellow cells.

VLAN & Port groups will be created on vDistributed Switch.

#

Port Group

Network settings for NSX Autonomous Edge.

Public IP address:

2

3

Tag VLAN:
Set security: enable Promiscuous mode and Forged transmits

4

These networks are stretch layer 2 (same subnet as on-prem).
Select IP for gateway CIDR (It's must not duplicate IP address)

5

192.168.137.80

2

Network 1

Uplink

192.168.138.77

–

must to have access to internet

3

Network 2

Trunk

–

–

4

Network 3

– (HA, optional)

192.168.137.81

192.168.137.82

VLAN

Remark

1

Management

137

For NSX Autonomous Edge management

2

Uplink

138

For NSX Autonomous Edge uplink

3

Trunk

140, 141, 142

Stretch L2 network traffic

#

OVF Template Name

Port Group

Primary Node

Second Node (optional)

Remark

1

Network 0

Management

On-premises Public IP

HI GIO's Public IP

<IP Address>

<IP Address>

Step 2: Creating port groups (VLANs)on vCenter (if we don't have)

Step 3: Configure VLAN & Security for TRUNK port

Step 4: Creating Network on HI GIO (detail steps can check here)

192.168.137.79